Flemished Eye and Mechanically Swaged
Type 41 slings are 4-leg All Purpose bridles, used both for balanced and unbalanced loads and for heavier loads where design calls for more distribution of weight by the use of attachment at four points. Consult Design Engineers for Proper Rigging of Unbalanced Loads.
 |
HOW TO ORDEREXAMPLE: For a 4-leg bridle sling, with eye hooks attached toeach leg, rated capacity of 12 tons at 30 degree, 10 ft. long.ORDER: One – 5/8″ diameter Type 41-1OL-1EH, 10 ft. long (shown). |
| Diameter of Wire Rope Inches |
MinLength(SL) of Sling Ft-In. |
Alloy Links Diameter Inches |
Rated Capacities in Tons EIPS-IWRC 60 Degrees |
Rated Capacities in Tons IPS-IWRC 45 Degrees |
Rated Capacities in Tons IPS-IWRC 30 Degrees |
Alloy Links Diam. Inches |
| 1/4 | 1-3 | 5/8 | 2.20 | 1.80 | 1.30 | 5/8 |
| 5/16 | 1-6 | 3/4 | 3.50 | 2.80 | 2.00 | 3/4 |
| 3/8 | 1-8 | 7/8 | 5.00 | 4.10 | 2.90 | 7/8 |
| 7/16 | 1-10 | 1 | 6.70 | 5.50 | 3.90 | 1 |
| 1/2 | 2-0 | 1-1/4 | 8.80 | 7.10 | 5.10 | 1-1/4 |
| 9/16 | 2-2 | 1-1/2 | 11.00 | 9.00 | 6.40 | 1-1/2 |
| 5/8 | 2-4 | 1-1/2 | 14.00 | 11.00 | 7.80 | 1-1/2 |
| 3/4 | 2-9 | 1-3/4 | 19.00 | 16.00 | 11.00 | 1-3/4 |
| 7/8 | 3-3 | 2 | 26.00 | 21.00 | 15.00 | 2 |
| 1 | 3-6 | 2-1/4 | 34.00 | 28.00 | 20.00 | 2-1/4 |
| 1-1/8 | 4-0 | 2-1/2 | 42.00 | 34.00 | 24.00 | 2-1/2 |
| 1-1/4 | 4-6 | 2-1/2 | 51.00 | 42.00 | 30.00 | 2-1/2 |
| 1-3/8 | 5-0 | 3-1/4 | 62.00 | 50.00 | 36.00 | 3-1/4 |
| 1-1/2 | 5-6 | 3-3/4 | 73.00 | 60.00 | 42.00 | 3-3/4 |
| 1-5/8 | 6-0 | 3-3/4 | 85.00 | 69.00 | 49.00 | 3-3/4 |
| 1-3/4 | 6-6 | 4-1/2 | 98.00 | 80.00 | 57.00 | 4-1/2 |
| 2 | 8-0 | 4-1/2 | 127.00 | 104.00 | 73.00 | 4-1/2 |
| 2-1/4 | 8-9 | Call | 154.00 | 126.00 | 89.00 | Call |
| 2-1/2 | 10-0 | Call | 188.00 | 154.00 | 109.00 | Call |
For approximate capacities using Fibre Core IPS: deduct 10% from IPS-IWRC strengths.
For approximate capacities on Hand Braided Slings: deduct 15% from corresponding mechanically swaged strengths.
For approximate capacities on Socket Attachments: add 5% to corresponding IWRC swaged strengths.
* These ratings refer to an evenly balanced load between the
four legs.
In most instances, the ratings for a 3-leg sling should be used to accommodate for an unevenly balanced load.
PERTINENT DIMENSIONS FOR END FITTINGS
6 x 19 with IWRC
| Diam of Wire Rope Inches |
Standard Loop Inside Width Inches |
Standard Loop Inside Length Inches |
Heavy Duty Thimble Inside Width Inches |
Heavy Duty Thimble Inside Length Inches |
Alloy Hook Size-Tons for IPS |
Alloy Hook Size-Tons for EIPS |
Carbon Shackle Size-Inches For IPS |
Carbon Shackle Size -Inches For EIPS |
Half Thimble Inside Loop Width Inches |
Half Thimble Inside Loop Length Inches |
Open Swage Socket Pin Diam. Inches |
Open Swage Socket Jaw Opening Inches |
Closed Swage Socket Hole Diam. Inches |
Closed Swage Socket Head Thickness Inches |
| 1/4 | 2 | 4 | 7/8 | 1-5/8 | 1 | 1 | 5/16 | 5/16 | – | – | 11/16 | 11/16 | 3/4 | 1/2 |
| 5/16 | 2-1/2 | 5 | 1-1/16 | 1-7/8 | 1-1/2 | 1-1/2 | 3/8 | 3/8 | – | – | 13/16 | 13/16 | 7/8 | 11/16 |
| 3/8 | 3 | 6 | 1-1/8 | 2-1/8 | 2 | 2 | 7/16 | 7/16 | 2 | 4 | 13/16 | 13/16 | 7/8 | 11/16 |
| 7/16 | 3-1/2 | 7 | 1-1/4 | 2-3/8 | 3 | 3 | 1/2 | 1/2 | 2-1/4 | 5 | 1 | 1 | 1-1/16 | 7/8 |
| 1/2 | 4 | 8 | 1-1/2 | 2-3/4 | 3 | 4-1/2 | 5/8 | 5/8 | 2-1/4 | 5-1/2 | 1 | 1 | 1-1/16 | 7/8 |
| 9/16 | 4-1/2 | 9 | 1-1/2 | 2-3/4 | 4-1/2 | 4-1/2 | 5/8 | 5/8 | 2-1/4 | 5-1/2 | 1-3/16 | 1-1/4 | 1-1/4 | 1-1/8 |
| 5/8 | 5 | 10 | 1-3/4 | 3-1/4 | 4-1/2 | 7 | 3/4 | 3/4 | 3-1/4 | 7 | 1-3/16 | 1-1/4 | 1-1/4 | 1-1/8 |
| 3/4 | 6 | 12 | 2 | 3-3/4 | 7 | 11 | 7/8 | 7/8 | 3-1/4 | 9 | 1-3/8 | 1-1/2 | 1-7/16 | 1-5/16 |
| 7/8 | 7 | 14 | 2-1/4 | 4-1/4 | 11 | 11 | 1 | 1 | 4-1/2 | 10-1/2 | 1-5/8 | 1-3/4 | 1-11/16 | 1-1/2 |
| 1 | 8 | 16 | 2-1/2 | 4-1/2 | 11 | 15 | 1 | 1-1/4 | 4-1/2 | 12 | 2 | 2 | 2-1/16 | 1-3/4 |
| 1-1/8 | 9 | 18 | 2-7/8 | 5-1/8 | 15 | 22 | 1-1/4 | 1-1/4 | 4-5/8 | 13-1/2 | 2-1/4 | 2-1/4 | 2-5/16 | 2 |
6 x 37 with IWRC
| Diam of Wire Rope Inches |
Standard Loop Inside Width Inches |
Standard Loop Inside Length Inches |
Heavy Duty Thimble Inside Width Inches |
Heavy Duty Thimble Inside Length Inches |
Alloy Hook Size-Tons for IPS |
Alloy Hook Size-Tons for EIPS |
Carbon Shackle Size-Inches For IPS |
Carbon Shackle Size -Inches For EIPS |
Half Thimble Inside Loop Width Inches |
Half Thimble Inside Loop Length Inches |
Open Swage Socket Pin Diam. Inches |
Open Swage Socket Jaw Opening Inches |
Closed Swage Socket Hole Diam. Inches |
Closed Swage Socket Head Thickness Inches |
| 1-1/4 | 10 | 20 | 2-7/8 | 5-1/8 | 22 | 22 | 1-3/8 | 1-1/2 | 5-1/2 | 15 | 2-1/2 | 2-1/2 | 2-9/16 | 2-1/4 |
| 1-3/8 | 11 | 22 | 3-1/2 | 6-1/4 | 22 | 30 | 1-1/2 | 1-3/4 | 6 | 17 | 2-1/2 | 2-1/2 | 2-9/16 | 2-1/4 |
| 1-1/2 | 12 | 24 | 3-1/2 | 6-1/4 | 30 | 30 | 1-3/4 | 1-3/4 | 6-1/2 | 18 | 2-3/4 | 3 | 2-13/16 | 2-1/2 |
| 1-5/8 | 13 | 26 | 4 | 8 | 30 | 30 | 1-3/4 | 1-3/4 | 6-1/2 | 18 | 3-1/2 | 3-1/2 | 3-9/16 | 3 |
| 1-3/4 | 14 | 28 | 4-1/2 | 9 | 37 | 37 | 1-3/4 | 2 | 7 | 21-1/2 | 3-1/2 | 3-1/2 | 3-9/16 | 3 |
| 2 | 16 | 32 | 6 | 12 | 45 | 60 | 2 | 2-1/2 | 7 | 24-1/2 | 3-3/4 | 4 | 3-13/16 | 3-1/4 |
| 2-1/4 | 18 | 36 | 7 | 14 | 60 | 60 | 2-1/2 | 2-1/2 | 8-1/2 | 25-1/2 | 4-1/4 | 4-1/4 | 4-5/16 | 4 |
| 2-1/2 | 20 | 40 | – | – | – | – | 2-1/2 | 3 | 8-1/2 | 26-1/2 | 4-1/4 | 4-1/4 | 4-5/16 | 4 |
| 2-3/4 | – | – | – | – | 3 | 3 | ||||||||
| 3 | – | – | 3 | 3 | ||||||||||
| 3-1/4 | – | – | 3 | 3-1/2 | ||||||||||
| 3-1/2 | – | – | 3-1/2 | 3-1/2 | ||||||||||
| 3-3/4 | – | – | 3-1/2 | 4 | ||||||||||
| 4 | – | – | 4 | 4 |