• 12,000 LB Capacity
  • 6 to 12 inch grip range
  • for walls 16 ft to 20 ft in length
  • (2) 6″ X 36″ pads, large actuator
  • Hands free operation with the Alignment Leg option

The KL12000 Barrier Lift has a 6 to 12 inch grip range to handle up to 20 foot jersey wall easily. It has a 12,000 pound capacity and hooks up with our recommended RigMax. This patented wall lifting attachment works using scissor action and the specially designed actuator. These actions working seamlessly together allow the machine operator to unload wall directly from the truck and set it into position. For tougher jobs, check out the Kenco MultiLift.

Lift, move and place all types of large barrier wall without the need to hook up additional hydraulics. The Kenco barrier lifter automatically grabs and releases the wall. Just position and rest the Kenco Barrier Lift KL12000 onto the wall top. This causes the ‘actuator’ to work, thus beginning the lifting process. The barrier tongs clamp tightly onto the wall surface without need for auxiliary hydraulic hookups. The swiveling pad angles adjust to match the slope of the wall. The elastomer pads securely grab onto the concrete surface. The lifting attachment grips the wall firmly as it is raised and placed into position. Once the wall has been set firmly back on the ground and tension is released, the tongs release automatically. This action continues with each cycle.


Kenco barrier lifters will pick up typical, single slope and F-shape barrier wall.  Standard models are available for use on concrete barriers with a 6-12″ top and capacities from 9,000 to 40,000 pounds. Our engineers can design custom models to accommodate any style of barrier.