The KL16K4T12 Barrier Lift has a 4 to 12 inch grip range. It has a 16,000 pound capacity and hooks up with our recommended RigMax.  The 4″ grip was designed to accommodate T-Wall or Bremer Wall. If using for this style of extra tall wall, it is highly recommended to purchase the corresponding alignment legs. This patented jersey barrier grab works using scissor action and the specially designed actuator. These actions working seamlessly together allow the machine operator to unload wall directly from the truck and set it into position.

Lift, move and place all types of large barrier wall without the need to hook up additional hydraulics. The Kenco barrier lifter automatically grabs and releases the wall. Just position and rest the Kenco Barrier Lift onto the wall top. This causes the ‘actuator’ to work, thus beginning the lifting process. The barrier tongs clamp tightly onto the wall surface without need for auxiliary hydraulic hookups. The swiveling pad angles adjust to match the slope of the wall. The elastomer pads securely grab onto the concrete surface. The lifting attachment grips the wall firmly as it is raised and placed into position. Once the wall has been set firmly back on the ground and tension is released, the tongs release automatically. This action continues with each cycle.